проводя курс на асе с прошивкой 8.2, заметил некоторые изменения в списке доступных действий MPF layer3/4 policy-map:

ASA-CO2(config)# policy-map test
ASA-CO2(config-pmap)# class class-default
ASA-CO2(config-pmap-c)# ?

MPF policy-map class configuration commands:
csc Content Security and Control service module
exit Exit from MPF class action configuration mode
flow-export Configure filters for NetFlow events
help Help for MPF policy-map class/match submode commands
inspect Protocol inspection services
ips Intrusion prevention services
no Negate or set default values of a command
police Rate limit traffic for this class
priority Strict scheduling priority for this class
quit Exit from MPF class action configuration mode
service-policy Configure QoS Service Policy
set Set connection values
shape Traffic Shaping
ASA-CO2(config-pmap-c)# shape ?

mpf-policy-map-class mode commands/options:
average configure token bucket: CIR (bps) [Bc (bits)], send out Bc only per
ASA-CO2(config-pmap-c)# shape average ?

mpf-policy-map-class mode commands/options:
<64000-154400000> Target Bit Rate (bits per second), the value needs to be
multiple of 8000
ASA-CO2(config-pmap-c)# shape average 200000 ?

mpf-policy-map-class mode commands/options:
<2048-154400000> bits per interval, sustained. Needs to be multiple of 128.
Recommend not to configure it, the algorithm will find out
the best value

ASA-CO2(config-pmap-c)# shape average 200000

на асах наконец-то появился шейпинг! :)

2 коментарі:

Unknown сказав...

Гм. А когда bgp появится?

invalidCCIE сказав...

очевидно за два релиза до mpls! :)